Email: Editor@biobasedworldnews.com Call: +44 (0) 7856 831 674
  • Webinar - The new wave in bio-based materials_ maximum value from lignin
  • Corbion - Together We Can Change the World!
  • Commercialising the bio-economy, WBM19
  • Port of Amsterdam

US-based scientist uncovers potential ‘sustainable’ refining method for lignin.

Posted on Mar 4, 2019 10:51:15 AM

leafLignocellulosic biorefinery needs to use complete feedstock to produce different products and if possible, high-value products, to make the refinery economically feasible. This requires new biorefinery processes like SOFA.”

A US scientist has claimed to have found a cost-effective way of extracting lignin from lignocellulosic biomass using selective organic solvent extraction. This method is also known as SOFA – a process that uses different conditions such as pH and temperature to derive lignin with different chemistry.

Dr. Joshua Yuan, chair of Synthetic Biology and Renewable products at Texas A&M University (@TAMU), has recently published his research findings in Green Chemistry, the peer-reviewed journal of the Royal Society of Chemistry.

He has promoted the use of the SOFA extraction method and other refining processes to produce multiple lignin streams.

This process is used so that a variety of lignin particles with different features can be produced,” Yuan said. “This will allow different functionality. It is an important consideration for applications like drug delivery and nanocomposites.”

As a result, he said, tailoring the lignin chemistry using SOFA provides a sustainable means for upgrading the low-value lignin and thus contributes to the profitability of biorefineries.

High-value products

Sustainable biorefinery heavily depends on the generation of value-added products, particularly from lignin. Despite considerable efforts, the production of fungible lignin bio-products is still hindered by the poor fractionation and low reactivity of lignin, according to the journal article.

Yuan said that lignocellulosic biomass can be used to produce second-generation biofuel, or advanced biofuel, which will be a sustainable and alternative solution to traditional fossil fuel. He added that grass-like sorghum and switchgrass can be grown to fix carbon dioxide and processed into ethanol for fuel.

He explained: “Considering the high yield of energy sorghum, energy cane and other feedstock, the productivity per acre is much higher than corn ethanol. This will reduce carbon balance and improve the energy output of biofuel. For perennial feedstock like switchgrass and energy cane, it also promotes soil and water conservation as well as biodiversity.”

Cost-effectiveness

Yuan said the problem is that lignin is the waste in this biorefinery process, which negatively impacts the economics and sustainability of the biorefinery. He said the utilisation of lignin for high-value products will improve biorefinery cost-effectiveness and sustainability significantly.

“Lignin nanoparticle is a high-value product that could achieve this, when it is used for bulk products like slow-release fertiliser,” he said. “Another very important aspect is that lignin is generally considered safe and biocompatible. And lignin nanoparticle can be used for drug delivery.”

Yuan said one of the most important challenges in biorefinery, specifically lignocellulosic biorefinery, is to utilise lignin for high-value products, Yuan said.

“Most of the current biorefinery configuration focuses on ethanol as the single product, which brings limited value to the output,” he said. “If you look at the corn ethanol biorefinery, they have distillers grains and corn oil as the by-products to add value, so that the refinery can make money. In the same way, the petroleum biorefinery industry utilises every bit of feedstock to produce different (preferably higher value) products.

“Lignocellulosic biorefinery needs to use complete feedstock to produce different products and if possible, high-value products, to make the refinery economically feasible. This requires new biorefinery processes like SOFA.”

Yuan said a plant cell wall has three major components: cellulose, hemicellulose and lignin. Both cellulose and hemicellulose are sugar-based, and can be used for ethanol fermentation.

He went on to say: “But lignin is an aromatic polymer, and we need to find good use for it. This paper provides one of the solutions.

“My lab has been focused on this, and we have developed routes to produce high quality carbon fibre, nanoparticles, asphalt binder modifier, bio-plastics and bio-diesel from lignin. This research was supported by the (US) Department of Energy Bioenergy Technology Office.”

For more information on how to maximise value from lignin, click on link below to register and watch re-run of ‘on-demand’ webinar below. https://www.biobasedworldnews.com/webinar-the-new-wave-in-bio-based-materials-maximum-value-from-lignin-with-industry-specific-fractions


New Call-to-actionYou may also be interested in reading:

Read: Stora Enso launches a wood-based biocomposite as a replacement for plastic.

Read: Project focus: Creating high purity lignin and affordable platform chemicals from wood-based sugars

 Read: Forest-based biomass industry: Where are we today and where are going tomorrow?

Read: Avantium collaborates with four industry experts to convert wood into a biochemical.

VisitWorld Bio Markets, 1st-3rd April 2019, Amsterdam.

NEW! And available to download: Issue #12 of the Bio-Based World Quarterly.

Topics: synthetic biology, ProcessRefining&Plants

Get The Latest Updates From Bio-Based World News

About the Author

Liz Gyekye
Liz Gyekye
Liz has spent more than ten years working in the waste management and bioenergy sector as a journalist.read more